Slide Introduction
The track is fixed on the ground and the motor base is fixed on the track. The drive belt extension motor can slide on the track to adjust the slack of the conveyor belt
Ordinary grooved or curved guide for movement of doors, drawers or other moving parts, often fitted with ball bearings
Slide rail
If the hinge is the heart of the cabinet, then the slide is the kidney. Whether the drawers, large or small, can be pushed and pulled freely, and how heavy the load is, depends on the support of the slide rails. From the current technology point of view, the bottom rail is better than the side rail, and the overall connection with the drawer is better than the three-point connection. Drawer slides vary in material, principle, structure, and process. High-quality slides have low resistance, long life, and smooth drawers.
Select points
1. Test steel. How much weight the drawer can support, mainly depends on the quality of the steel in the track. Different thicknesses of drawer steels have different thicknesses and different bearing weights. You can pull out the drawer when you are purchasing it and use your hand to press it slightly to see if it will loosen, squeak, or flip.
2. Look at the material. The material of the pulley determines the comfort of the drawer when it slides. Plastic pulleys, steel balls, and wear-resistant nylon are the three most commonly used pulley materials, of which the wear-resistant nylon is the top grade, and it slides silently. To see if the pulley is good or bad, you can push and pull the drawer with one finger. There should be no astringent feeling and no noise.
Pressure device
In the cabinet hardware accessories, apart from the slide rails, the drawers and hinges closely associated with them, there are many pneumatic and hydraulic device type hardware. These fittings are produced in response to evolving cabinet design methods, and are mainly used for flip-top doors and vertical lift doors. Some devices have three or even more braking positions, also known as "free to stop." Cabinets with pressure devices installed are quiet and easy to use for the elderly
Select points
To see if the pressure device works well, try it more! See if it's easy and the brake is convenient. However, it should be noted that the pressure device is good, but it is expensive.
The high chromium wear-resistant alloy steel balls produced by our company have the following advantages:
1. With extremely high hardness, usually between 60-66 HRC, it can effectively resist wear and grinding and extend service life.
2. Excellent wear resistance, able to maintain stable performance during high-speed grinding and grinding, reducing the risk of wear and fracture.
3. It has good impact resistance and can withstand greater impact force and is not easy to break during high-speed grinding and grinding.
4. It has good corrosion resistance, can maintain stable performance in wet and corrosive environment, and is not easy to rust and corrosion.
5. Can maintain stable performance in high temperature environment, not easy to deform and soften, suitable for high temperature grinding and grinding process.
6. The wear rate of the steel ball is low, which can reduce the loss of abrasives and materials and improve the grinding and grinding efficiency.
Chromium Oxide Abrasive,Alloy Steel Ball,Tempered Alloy Steel Balls,Wear Parts Steel Ball
Xuzhou Surun wear-resistant material Co., LTD , https://www.suruntools.com