Classification of glass materials
The first type is glass plate, which is mainly used for the parts that need lighting in decoration. There are flat glass, embossed glass, frosted glass, coated glass, engraved glass, tempered glass, etc., which can be used according to different parts and different decorative effects. Use.
The other type is glass bricks, mainly used for glass partitions, glass walls and other projects, mainly hollow glass bricks. It can be divided into single cavity and double cavity, and has various specifications such as square brick and rectangular brick. The surface shape is also very rich, and it can be selected according to the decoration needs.
Quality identification of glass materials
1. Inspection of glass sheets. The appearance quality is mainly to check the flatness and observe whether there are quality defects such as bubbles, inclusions, scratches, lines and fog spots. The glass with such defects will be deformed during use, which will reduce the transparency and mechanical strength of the glass. And the thermal stability of the glass, engineering should not be used. Since the glass is a transparent object, the quality can be basically identified by visual inspection at the time of selection.
2. Inspection of glass processed products. In addition to the requirements of the flat glass, it should also check the processing quality, whether the standard size, processing accuracy and pattern definition meet the requirements, and the side is not allowed to be defective.
The appearance quality of the hollow glass brick is not allowed to have cracks, and the opaque unmelted material is not allowed in the glass blank, and the welding and the poor bonding between the two glass bodies are not allowed. Visual inspection of the brick body should be free of corrugations, bubbles and lamellar streaks resulting from inhomogeneities in the glass blank. The outer surface of the large surface of the glass brick should be less than 1 mm, the convexity should be less than 2 mm, the weight should meet the quality standard, no surface warpage, notch, burr and other quality defects, the angle should be square.
Polishing wheels are widly sued on steels ,titanium, copper, brass, aluminum, and also all types of non-ferrous materials, such as gems, stones, glass, plastic, acrylic, ceramics, carbon fiber. Polishing wheels can be all types Grinding Wheels which have more fine grits to achieve the aim of low value of Ra.
Polishing wheels can be diamond grinding wheels, or conventional abrasive grinding wheels, like PVA grinding wheels, silicon carbide grinding wheels, polishing wheels, rubber grinding wheels. Polishing wheels can also be made to polishing Mounted Point with shanks.
Kemei produce and aim on different types of grinding tools, such as aluminum oxide grinding wheel, silicon carbide grinding wheels, mounted points, Diamond Grinding Wheels, CBN Grinding Wheels and wheel dressers.
If you need any type of grinding tool or professional advice about grinding on your workpieces. Don`t hesitate to contact us!
Polishing Wheels,Rubber Polishing Wheel,Mirror Polishing Wheel,Buffing Wheel Dressing Tool
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlungrindingtools.com