Before the renovation, we must do some preparatory work, such as the size data of some of the main furniture materials in the home. If the size and height are not correct, it will not only cause inconvenience in daily life, but also seriously rework. Today, Xiao Bian shares some home improvement products for everyone. Common knowledge of size and height. 
[Gas stove] height: It should be between 0.86m-0.89m or between 0.94m-1.00m.
Width: It should be between 0.47m-0.5m or 0.55m-0.62m. The height of the gas stove should be calculated from the zero height of the finished floor tile until the stove level. The width of the cooktop refers to the place where the diameter of the tabletop is the widest. If the tabletop is not a standard straight line but an arc, its widest diameter should not exceed 0.62m, then the natural curve transitions to the narrowest distance, and its narrowest diameter should not Less than 0.47m.
[Hung TV] Height: People sit on the sofa and measure the height of their eyes to the ground. The center line (horizontal line) of the TV is flush with the line of sight, or slightly lower than the line of sight.
In the actual installation, if the bottom of the wall-mounted TV is too close to the ground, it may cause the following problems: 1. It is not convenient for the floor and corner of the TV to be clean; 2. Looking down always may cause neck fatigue. 3, wall-mounted TV position is too low, the upper vacant location too much, will cause inconsistent with the wall hanging; 4, children play, they may accidentally touch the LCD screen, but also may cause child safety Hidden danger. Therefore, the TV installation does not have a fixed height and should be installed according to its actual situation.
Restaurant chandelier The height of a common restaurant chandelier is determined based on the height of the room, the height of the table, and the size of the restaurant. Most chandelier should be about 55-60cm from the dining table, and the distance between the lowermost point and the ceiling should be less than 2.2m. This height will neither affect the illumination nor the collision problem. 
[Wardrobe] 1. Below 650mm, it is generally designed to put small items. It is designed to be used as seasonal clothing in the scale of 650-1850mm. It is designed to be items not commonly used in 1850mm or more. The next cabinet is generally 2100mm, and the rest is returned to the cabinet.
2, the top height of the drawer is preferably less than 1250mm, especially the elderly room should be considered about 1000mm, so that the use of more smoothly, the height of 150-200mm, the width of 400-800mm. 3, pants rack space should be retained 650mm, if it is used to hang hangers, it should be retained at least 700mm. 4. The spacing between laminates and laminates is 400-600mm. Too small and too large are not good for placing clothes. 5, the depth of the wardrobe in the 530-620mm, generally for women, the wardrobe depth in 580mm, plus the door, the entire wardrobe in the width of 600mm, the width of the clothes put on there is not much problem. 6, short clothing, suits have a minimum height of 800mm. 7, long coat can not be less than 1300mm height, otherwise it will drag to the bottom of the cabinet. 8, if you want to place a dressing mirror inside the cabinet, the height should be controlled at 1000-1400mm.
Tatami Height: The height of a tatami bed is determined by the height of the room and the required storage space, usually between 25-50cm. For a house with a high storey height, even more than 3 meters, the height of tatami is about 40cm; if the storey height is lower, the height should be reduced accordingly. If it is too high, the room will be very depressed.
In addition, if a tatami mat is to be placed on a lift table, the height must be 35cm or more, and if it does not require a lift table, it is between 15-20cm. Size: Tatami standard rectangular and non-standard rectangular two, the regular rectangular aspect ratio of 2:1, specifications are generally 1800mm * 900mm, the standard thickness of 35mm, 45mm, 55mm, but generally use the thickness of 55mm specifications, other sizes rarely use.
ã€Tiles】 Glazed tiles: The square glazed tiles are 152*152mm, 200*200mm, rectangular glazed tiles are 152*200mm, 200*300mm, etc. The commonly used glazed tiles are 5mm and 6mm thick. Whole body tiles: There are several kinds of 400*400mm, 500*500mm, 600*600mm, 800*800mm, 900*900mm, and 1000*1000mm. Vitrified tiles: 300*300mm, 400*400mm, 500*500mm, 600*600mm, 800*800mm, and so on. Mosaic: 20*20mm, 25*25mm, 30*30mm, thickness is between 4mm-4.3mm. Calcium silicate board: The specification of calcium silicate board is 1220*2440mm, which is commonly used in domestic length and width specifications. 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, and 15mm are the best-selling thicknesses on the market.
[Gas stove] height: It should be between 0.86m-0.89m or between 0.94m-1.00m. Width: It should be between 0.47m-0.5m or 0.55m-0.62m. The height of the gas stove should be calculated from the zero height of the finished floor tile until the stove level. The width of the cooktop refers to the place where the diameter of the tabletop is the widest. If the tabletop is not a standard straight line but an arc, its widest diameter should not exceed 0.62m, then the natural curve transitions to the narrowest distance, and its narrowest diameter should not Less than 0.47m.
[Hung TV] Height: People sit on the sofa and measure the height of their eyes to the ground. The center line (horizontal line) of the TV is flush with the line of sight, or slightly lower than the line of sight. In the actual installation, if the bottom of the wall-mounted TV is too close to the ground, it may cause the following problems: 1. It is not convenient for the floor and corner of the TV to be clean; 2. Looking down always may cause neck fatigue. 3, wall-mounted TV position is too low, the upper vacant location too much, will cause inconsistent with the wall hanging; 4, children play, they may accidentally touch the LCD screen, but also may cause child safety Hidden danger. Therefore, the TV installation does not have a fixed height and should be installed according to its actual situation.
Restaurant chandelier The height of a common restaurant chandelier is determined based on the height of the room, the height of the table, and the size of the restaurant. Most chandelier should be about 55-60cm from the dining table, and the distance between the lowermost point and the ceiling should be less than 2.2m. This height will neither affect the illumination nor the collision problem. [Wardrobe] 1. Below 650mm, it is generally designed to put small items. It is designed to be used as seasonal clothing in the scale of 650-1850mm. It is designed to be items not commonly used in 1850mm or more. The next cabinet is generally 2100mm, and the rest is returned to the cabinet. 2, the top height of the drawer is preferably less than 1250mm, especially the elderly room should be considered about 1000mm, so that the use of more smoothly, the height of 150-200mm, the width of 400-800mm. 3, pants rack space should be retained 650mm, if it is used to hang hangers, it should be retained at least 700mm. 4. The spacing between laminates and laminates is 400-600mm. Too small and too large are not good for placing clothes. 5, the depth of the wardrobe in the 530-620mm, generally for women, the wardrobe depth in 580mm, plus the door, the entire wardrobe in the width of 600mm, the width of the clothes put on there is not much problem. 6, short clothing, suits have a minimum height of 800mm. 7, long coat can not be less than 1300mm height, otherwise it will drag to the bottom of the cabinet. 8, if you want to place a dressing mirror inside the cabinet, the height should be controlled at 1000-1400mm.
Tatami Height: The height of a tatami bed is determined by the height of the room and the required storage space, usually between 25-50cm. For a house with a high storey height, even more than 3 meters, the height of tatami is about 40cm; if the storey height is lower, the height should be reduced accordingly. If it is too high, the room will be very depressed. In addition, if a tatami mat is to be placed on a lift table, the height must be 35cm or more, and if it does not require a lift table, it is between 15-20cm. Size: Tatami standard rectangular and non-standard rectangular two, the regular rectangular aspect ratio of 2:1, specifications are generally 1800mm * 900mm, the standard thickness of 35mm, 45mm, 55mm, but generally use the thickness of 55mm specifications, other sizes rarely use.
ã€Tiles】 Glazed tiles: The square glazed tiles are 152*152mm, 200*200mm, rectangular glazed tiles are 152*200mm, 200*300mm, etc. The commonly used glazed tiles are 5mm and 6mm thick. Whole body tiles: There are several kinds of 400*400mm, 500*500mm, 600*600mm, 800*800mm, 900*900mm, and 1000*1000mm. Vitrified tiles: 300*300mm, 400*400mm, 500*500mm, 600*600mm, 800*800mm, and so on. Mosaic: 20*20mm, 25*25mm, 30*30mm, thickness is between 4mm-4.3mm. Calcium silicate board: The specification of calcium silicate board is 1220*2440mm, which is commonly used in domestic length and width specifications. 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, and 15mm are the best-selling thicknesses on the market. Home improvement size data
Gw Series Rebar Bending Machine , reasonable design, simple structure and can bend steel rod diameter to any required shape applying to bridge, tunnel and small, medium as well as large construction projects.
1.Simple operation, safe and durable, high quality copper wire motor, guarantee a more stable performance.
2.Enclosed gearbox lubrication, worm gear and worm drive, with speed adjustable gear, strong bending strength, not rebound.
3.Ultra-high hardness accessories, adjustable baffle which guarantee a longer service life.
4.Machine surface adopts plastic-spray treatment, disc, long strips are solid and forged, chrome plated, beautiful and generous.
We can customize GW65 Rebar Bending Machine according to customer's requirement.
GW Series Rebar Bending Machine
Gw Series Rebar Bending Machine,Deformed Rebar Rod Bending Machine,Used Rebar Bending Machine,Steel Bar Bending Machine
BAODING JINDI MACHINERY CO., LTD , https://www.rebarconnector.com