What kind of material is best for tiling? This is a question that every decorator always asks. The traditional paving method uses cement mortar as a binder for tile laying. Compared with the thin sticking method, the traditional paving method reduces the leveling process of the wall surface, and after the wall is roughed, the tile can be laid.
The first step of proportioning tiling: according to the ratio of cement sand 1:2.5, dry mix of cement sand, mixed with water. Apply cement mortar to the back of the water-filled tiles, then stick the tiles on the wetted wall that has been pulled, and lay them in turn. After the tile is placed on the wall, no major adjustments can be made. If it is removed, the old cement mortar can be scraped off before being applied.
Now Xiaobian recommends you a good effect, using inexpensive products, that is, tile adhesive, that is, Yi clay, or tile adhesive.
The material used for tiling is preferably tile adhesive. Why, mainly because of the characteristics of tile adhesive: high bonding strength, water resistance, frost resistance, aging resistance and convenient construction of wall brick glue, it has many advantages. Instead of the traditional cement yellow sand, the adhesive strength of the tile adhesive water is several times that of the cement mortar, and is now widely used in various interior and exterior walls, floors, bathrooms and kitchens.
Tile adhesive is scientifically formulated from high-quality cement, polymer additives, etc. It is an inorganic paste material that meets environmental requirements and has a strong adhesion to smooth surfaces.
Glue classification of wall tiles
1) Ordinary tile adhesive. Ordinary tile adhesive is suitable for pasting various floor tiles or small wall tiles of ordinary mortar surface.
2) Enhanced tile adhesive. It has a strong adhesion and anti-dropping force, and can play a good role in the adhesion of wall tiles and non-mortar surfaces that require a relatively large bonding force, such as wood.
3) Heavy brick tile adhesive. This type of glue has a large adhesive force and is flexible and can withstand the stress caused by thermal expansion and contraction of the adhesive layer. It can be used for gypsum board, fiberboard, splint or old veneer. Paste of stone plate.
Disinfectant for material surface, air, water (not drinking water) and human skin etc. Such as public facilities,vehicles, home,hospital
Disinfectant
Disinfectant
SJZ Chenghui chemical co ltd , https://www.chenghuichemicals.com