The feed pulverizer developed by Wanhua is a processing machine that uses a motor as a power to drive the rotor to rotate at a high speed, and pulverizes the feed and other materials into fine particles through the collision of a high wear-resistant hammer head and a toothed disc. One of the indispensable equipments in the industry is widely used in the crushing and processing of various feeds for agriculture, animal husbandry and fishery, as well as the crushing of raw materials in the industries of brewing, paper making, environmental protection and fertilizer. Wanhua Feed Crusher brings convenience to all walks of life, especially the vast rural aquaculture industry. Wanhua Machinery details the characteristics of the feed mill:
First, it has the characteristics of simple structure, strong versatility, high productivity and safe use. It is a kind of machinery that uses high-speed rotating crushed feed, which has the advantages of small volume, light weight, fine product size and high working speed.
Instructions for use:
1. The long-term operation of the pulverizer should be fixed on the cement foundation. If the working place is changed frequently, the pulverizer and the motor should be installed on the frame made of angle iron. If the pulverizer is powered by diesel, the power of the two should be matched, that is, the diesel engine power is slightly larger than the pulverizer power, and both The pulley grooves are the same, and the outer end faces of the pulleys are on the same plane.
2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, it must be tightened.
3. Check if the belt tightness is appropriate and whether the motor shaft and the pulverizer shaft are parallel.
4. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision in the shell. Whether the rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine, the motor and the smash Machine lubrication is good.
5. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency.
6. After the pulverizing table is started, it will be idling for 2 to 3 minutes. After there is no abnormal phenomenon, it will be fed again.
7, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload the machine for a long time. If vibration, noise, high temperature of the bearing and the body, and external spraying are found, stop the machine immediately and continue working after troubleshooting.
8. The crushed materials should be inspected carefully to avoid accidents such as copper, iron, stones and other hard objects entering the crushing room.
9. The operator should not wear gloves. When feeding, stand on the side of the crusher to prevent rebound debris from injuring the face.
Our company's main production equipment: organic fertilizer crusher Cinder crusher network: http://
Company Name: Gongyi City Wanhua Machinery Trading Co., Ltd. Mobile: 15890034561
Phone: 0371-64127058
stainless steel sink strainer can be used for fruit and vegetable washing drain basket, it is a useful stainless steel kitchen tool and it also called Draining Rack or draining basket. It is very useful when you wash your fruit and vegetable, it will make your fruit and vegetable health to eat.
The material is food grade 304 stainless steel which is anti rust and easy to wash
Fruit Vegetable Washing Draining Basket,Stainless Steel Kitchen Tool,Draining Rack, Draining Basket
Shenzhen Lanejoy Technology Co.,LTD , https://www.szcoolingrack.com