Engineering hot air fuel refueling matters needing attention

Relevant personnel for fueling must have relevant capabilities and are familiar with the manufacturer's instructions and current regulations regarding the safe refueling of heaters.
Use only the fuel specified on the heater's nameplate.
All flame indicators are extinguished and the heater is allowed to cool before it can be refueled.
When refueling, check for leaks at the junction of the tubing and the tubing. Before the heater runs, any leak must be repaired.
The fuel reserve of the buildings near the heaters must not exceed the fuel consumption of the heaters for one day. A large amount of fuel reserves must be placed outside the building for all fuel tanks and heaters, oxy-acetylene spray guns, welding equipment, etc. at least a minimum distance apart (except for the fuel storage with the heater).
Fuel storage should be limited to places where fuel is not allowed to infiltrate and fall onto a live fire that could cause a fire.
The storage of fuel must be consistent with current regulations.
Do not use heaters where gasoline, paint solvents, or other highly flammable gases are present.
When using a heater, follow local regulations and regulations.
Heater attachments such as water tarpaulins, canvas and similar materials should be placed at a safe distance from the heater. These materials are preferably flame retardant. These materials should be secured securely to prevent them from being ignited or interfere with the operation of the heater due to wind forces.
Use heaters in locations where there is no flammable gas or high levels of dust.
Use only on the voltage, frequency and phase specified on the nameplate.

Single Lever Bidet Mixer

1. Bathroom spray gun, can also be called a women's washer.


2. The general spray gun comes with a pressurization module, often used as a flushing toilet, but also can facilitate flushing the corner of the toilet, cleaning the basin, cleaning the broom and other functions, after installation, you will find that the function is simply too humane. 3. When installing, you only need to use a three-way angle valve at the toilet access. One way the water goes into the toilet and the other way into the spray gun. There are multiple options for spray gun water pipes, among which explosion-proof bellows and telephone line hoses are the most commonly used, especially telephone line hoses are the most widely used because they do not take up space and are highly stretchable.

Single Lever Bidet Mixer,Single Handle Basin Mixer,Single Handle Basin Faucet,Single Handle Basin Mixer Taps,Excellent Quality Single Handle Basin Mixer

WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com

Posted on