Programmable rotation, subroutine, subroutine call: The eccentric sleeve has a boss and a keyway that are evenly distributed on the 360° circumference. In order to simplify the calculation and simplify the program, the rotation and subroutine are used in the preparation. The subroutine of the eccentric sleeve processing three long grooves of 5.5mm width is as follows:
The main program for processing three 5.5mm long slots uses subroutine calls and programmable rotation. Programmable Rotation: The format AROTRPLAROT is an additional rotation referenced to the currently valid set or programmed zero point; the RPL rotates in-plane: the angle at which the coordinate system rotates. The specific programming is as follows:
Previous page next page
Tig Welding Torch have a type named air cooled tig welding torch, it have the model number: WP-9 Tig Torch, WP-17 Tig Torch, WP-26 Tig Torch. When you use Tig welding torch, Tig Welding Nozzle will ejected Tungsten Inert Gas to produce a protective layer around the arc cut off the air in order to prevent its tungsten. Prevent its welding tungsten, pool and adjacent heat-affected zone, to obtain high-quality welds. We are a manufacturer in China main produce tig welding torches.
WP-9 Tig Torch, WP-17 Tig Torch, WP-26 Tig Torch
EDAWELD COMPANY LIMITED , https://www.jsedaweld.com