Floor tiles are ground decoration materials, also called floor tiles. Made of clay. A variety of specifications. Hard, wear-resistant, moisture-proof. Some are glazed and have a decorative effect. Mostly used for floors and floors of public buildings and civil buildings. Sticking tiles should be aware of the decoration knowledge that every owner should know. The floor tiles are the basis of home improvement. Only by grasping the matters needing attention on the tiles, can they serve for a better home life and be free from worries. The following are the considerations for the tiles that I collected for you. They are very practical and I hope to help friends who have this need!
What are the tiles laying method?
At present, there are two kinds of brick laying methods that are most common: straight laying and oblique laying.
Shop: Tiles are laid out in a parallel manner on the side of the wall. This is the most commonly used way of laying.
Oblique shop: refers to the brick wall and the edge of the way to lay the way 45 degrees, but this kind of paving method is more costly brick.
Ground floor tiles left seam requirements
General floor tiles are divided into two types: wide slits and narrow slits.
Slits: Generally used when we are laying vitrified tiles, the ordinary left seams are kept on the order of 1~1.5mm, and at the same time, we use seaming agents that are close to the color of the tiles for jointing, but we Need to pay attention to paving must be left seam, this is to consider the problem of thermal expansion and contraction of tiles.
Wide seam: The wide seam is commonly used when paving antique tiles. The general seam is between 5 and 8mm. We can choose the seaming agent that is close to the color of the brick body, or choose the contrasting seaming agent. Deal with brick seams.
Tips: There are many varieties of floor tiles, such as whole body tiles, glazed tiles, seepage tiles, whole body polished tiles, and osmotic polished tiles. These floor tiles are not slippery. If there are elderly or children in the family, we are When buying, be sure to do a slip test on the tiles, this is to avoid problems.
Tiling tile considerations
1. The stone used for the indoor ground is generally a polished plate with a plate thickness of about 20 mm. There are currently thin plates with a thickness of about 10 mm, which is suitable for home decoration purposes. Each piece has a size of 300 mm × 300 mm ~ 500 mm × 500 mm. The use of thin sheets and 1:2 cement mortar can be used to laminate 107 glue.
2, cleaning the grass ground floor leveling → cement mortar leveling → high calibration, bombing line → selection of materials → water infiltration plate wet → installation of standard blocks → paving cement mortar → paving stones → pouring seams → cleaning → maintenance delivery.
3, the grassroots treatment should be clean, flattened and repaired at the uneven level, the grassroots should be clean, can not have mortar, especially lime-ash mortar, oil stains, etc., and wet the ground with water. When paving stones and porcelain tiles, standard blocks must be placed. The standard blocks should be placed at the cross intersection and installed diagonally.
4, paving operation should be followed by each line, stone must be soaked in water, wipe the back after dry. The maintenance of stone and porcelain tiles after pavement is very important. After 24 hours of installation, they must be sprinkled with water to protect them. After the towel is covered, it is covered with sawdust.
5, before the laying of the plate to try spelling, flower, color, number, in order to enter the laid out of the ground color consistent.
6, stone must be soaked in water and dried. In order to avoid affecting the coagulation and hardening, problems such as hollowing and shelling occur. After the plastering is completed, the person must not be allowed within 2 to 3 days.
Editor's summary: The above is the netizen exposes the decoration experience: Sticks the floor tile notice The rookie owner must know the relevant introduction of the money-saving Raiders, hopes to be able to help the friend who has this kind of demand! For more information, please continue to follow our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!
American style floor tiles simple living room effect beautiful anti-slip floor tiles living room floor tiles what color balcony floor tiles
Chemical Industry Mass Flow Meter
Sealand is a professional supplier of Chemical Mass Flow Meter, Chemical Mass Flowmeter, Chemical Flowmeter, Chemical Flow Meter, Chemical Coriolis Meter, ATEX, IECEx & CE approved.
The meter can work with a pulse receiver(Count). The connection is as follows. The resistance value is up to the cable length & the max. input pulse frequency of receiver. Current 10mA is suitable for most receivers; however, you can reduce the resistance value when the cable is long. The max. current could be 50mA. Please use the fixed frequency output function to check if the cable length & resistance value is suitable.
Please check following items before operation, and operate according to relevant rules.
a) If the meter is damaged during shipment and installation;
b) If the voltage is same as marked on nameplate;
c) If the fuse is correct;
d) If the meter is grounded properly.
e) If the Meter SN on the nameplate of sensor and transmitter are the same.
If everything is fine, please open all valves, make the pipeline full of liquid and then power on
the meter for warm-up for 20min before operation. Finally, conduct zero calibration after first
start, and shall do it again if the meter is moved to another site.
Preparation for zero calibration:
a) Power on the meter for approximately 20min for warm-up;
b) Run the process fluid through the sensor until the sensor temperature reaches the normal
process operating temperature.
c) Close the shutoff valve downstream from the sensor.
d) Ensure that the sensor is filled with fluid and the process flow has completely stopped.
Chemical Mass Flow Meter, Chemical Mass Flowmeter, Chemical Flowmeter, Chemical Flow Meter, Chemical Coriolis Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com