Self-leveling floor leveling is a way that is often chosen for large-area leveling. The thickness of the leveling is relatively thin and does not make you have a large visual difference. Therefore, many people think that the effect is better. So, what is the operation procedure in this way? The following is a small series of decoration homes to understand the detailed operation steps.
Self-leveling floor leveling steps:
The first step: ground grinding
When doing this step, in the case of the ground bulge, the method of rotating flat grinding should be used to grind the higher place. If it is not smoothed, it is likely that there will still be unevenness when leveling, so If the first step is not done well, then the next operation is also in vain. Therefore, it is recommended that you pay attention to this step and carefully complete the related grinding work.
The second step: brush interface agent
After polishing the ground, you need to apply the interface agent twice on the ground. Some people may not know what the interface agent is. In fact, it is an adhesive. It has a very strong bonding ability, and it has water resistance and anti-aging. The effect is also very good. At this time, the purpose of brushing it is to make the cement better connect with the ground, so as to avoid the occurrence of empty drums or falling off. However, there are many fakes on the market. Therefore, it is recommended that you choose a well-known brand when choosing an interface agent.
The third step: self-leveling cement ratio
This kind of cement is different from the cement we usually see. The general cement needs to be used together with river sand. However, this cement must add anything, let it flow by itself, but, in actual addition When you are in the water, you must pay attention to the amount of control. Otherwise, there may be insufficient strength after drying. Generally speaking, the ratio of cement to water can be controlled in about one to two.
The fourth step: pouring self-leveling
At this time, the workers need to put on the relevant shoes, so as to avoid the occurrence of footprints on the cement during the actual construction process. This is also a very important step in the leveling process of the self-leveling floor, because it can not level itself. Therefore, you must use the relevant ruler to push, so that the cement can be completely dispersed.
Step 5: Roller infiltration
After completing the above steps, you need to use the roller to help you do the relevant ground finishing work. Someone may ask what its purpose is and whether it will leave marks on the ground. In fact, it will not be in Leaving traces on the ground can instead flatten the uneven ground on the ground.
Step 6: Maintenance
After the above steps are completed, the construction personnel must also maintain the self-leveling floor leveling products. It is necessary to close the scene for 24 hours. In these 24 hours, avoid walking or impact. Only This will ensure that the quality of the entire plane will not be affected.
The above is the specific operation steps for leveling the self-leveling floor. If you want it to work well, you must follow the steps strictly in the actual leveling. Once any one of the steps is leaked or improperly operated, it will affect The overall effect, therefore, it is recommended that you must be careful and carefully complete each step in the operation.
The above is the whole content of the self-leveling floor leveling brought by Xiaobian. I believe that after reading this article, you have a basic understanding of self-leveling ground leveling. If you want to know more about decoration consultation, please click to enter the decoration encyclopedia. Section.
More related wonderful reading:
What is a self-leveling floor? How about self-leveling the floor?
How to level the self-leveling floor? Self-leveling floor leveling price
Makeup Mirror With Lights,Mirror With Led Lights,Light For The Cosmetic Mirror,Mirror With Bathroom Led Light
NINGBO EASTKEY ILLUMINATE APPLIANCE CO.,LTD , https://www.dkledmirrorlight.com