Q: How to wear off protective clothing?
A: First, wear protective equipment order
Step 1: Wear a mask, hold a mask in one hand and buckle it in an appropriate part of the face. Put the mask on the right part in the other hand and press the nose clip tightly against the bridge of the nose. During this process, hands do not touch any part of the face. Step 2: Wear a hat and wear a hat. Be careful not to touch your face with your hands. Step 3: Wear protective clothing. Step 4: Wear protective eyes and pay attention not to touch your face with your hands. Step 5: Put on shoe cover or rubber shoes. Step 6: Put on gloves and put the gloves on the outside of the protective clothing cuffs.
Second, take off the protective equipment order
Step 1: Remove the protective goggles and place in disinfectant. Step 2: Take off the protective clothing, place the opposite side out and put it in a yellow plastic bag. Step 3: Remove the gloves. Disposable gloves should be turned outwards and placed in a yellow plastic bag. The rubber gloves should be placed in disinfectant. Step 4: Put your finger back into the hat, gently pull the hat off and out and put it in a yellow plastic bag. Step 5: Take off the shoe cover or rubber shoes, place the shoe cover outwards, put it in a yellow plastic bag, and put the shoes into the disinfectant. Step 6: Remove the mask, hold the mask with one hand, remove the mask with the other hand, and place it in a yellow plastic bag. Be careful not to touch the face with your hands.
Center Drill Bit is also known as Slocombe Drills, Centre Drills were originally designed to create the countersink required to locate a tailstock centre when turning between centres. They have a point angle of 60° to match the angle of a Tailstock Centre.
A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece.
Carbide Center Drills,Hardware Tool Step Drill Bit,Wooden Box Packed Drill,Hss Center Drill Set
Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com