1 quenching and tempering: the so-called quenching and tempering is the heat and moisture effect of the mixed powdery material through water vapor, so that the starch in the material is gelatinized, the protein is denatured, and the material is softened to facilitate the granulator to improve the quality and effect of the granulation.
2 granulation: the mechanical action of a single raw material or compound mixture compacted and extruded out of the die hole to form a granular feed called granulation
3 pulverization rate: a certain amount of finished granules are placed in a special pulverization rate measuring instrument, which is turned over at a prescribed speed within a prescribed time period, and then the proportion of the powder converted from granules in the total feed is measured. .
4 Mixing: It is an operation in which various feed ingredients are blended under the action of external force to make them evenly distributed after being metered.
5 puffing: It is a powdery raw material that will be mixed with steam. After being steamed and tempered, it is extruded by a puffing machine, rapidly expands when the material is discharged from the die hole, and is cut into a porous pellet feed product. process.
6 Weighing accuracy: refers to the degree of agreement between the weighing result of the batching weighing scale and the weighed value.
7 Repeatability: refers to the ability to put the same load on the scale multiple times in the same way under the same working conditions. The batching scale provides the ability to achieve consistent results.
8 Thinner: It is a kind of feedable material mixed in a small amount of components. After dilution and mixing, the concentration of the active main raw material can be changed to make it diluted. But you can't change its blending characteristics.
9 batching cycle: refers to the time when the batching scale completes a batch of operation from the feeding and weighing multiple operations until the weighing bucket is finished discharging.
10 Hammer screen gap: The so-called hammer screen gap refers to the distance from the end of the hammer to the inside of the screen when the mill is working.
The LED projector lamp is used to specify the luminance above the surrounding environment, and also called the spotlight.Usually, it can be aimed at any direction and has a structure that is not affected by climatic conditions.It is mainly used for large area operation field, building outline, stadium, overpass, monument, park and flower bed.As a result, almost all outdoor use of large areas of lighting can be seen as a projector lamp.
Description of products
1. Fashionable, modern appearance design, make lamps and lanterns also become a work of art, with the environment perfect union.
2. The main material of the luminaire is made of high strength die-casting aluminum material, and the surface anti-aging electrostatic spraying process, Self-cleaning and anti-corrosive.
3. Tempered glass cover with high strength and impact resistance.
4. The lamp can be configured white or monochromatic RGB, gorgeous lighting effects, color purity, powerful change.
5. The lamp body is made of high - die cast aluminum material, surface electrostatic spraying
6. The unique rotatable fixed bolt can be rotated 360 degrees.
7. The light source adopts 1W single RGB light source, LED combination optical arrangement, and the mixing effect is better.
8. The light can be controlled by DMX512, a powerful function of changes in lighting effects.
9.Lamp series, power can be between 18W-36W, can be used for a variety of applications.
Product show
Installation Instruction
Led Tile Slots Lamp,Led Project Lamp,Led Night Lamp,Led Mood Lamp
Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com