This standard specifies the requirements and test methods for anti-static overalls. Anti-static overalls eliminate static electricity to prevent sparks from causing fire.
High temperature protective clothing
This standard applies to protective clothing used by workers exposed to high temperatures. These garments are made of flexible fabrics, including hoods and booties of the same fabric, but do not include Other head, hand and foot protection items.
Test project performance level insulation service level example
Limit flame spread A flame retardant
Convection heat B1-B5 ambient temperature: 200oC
Radiant heat C1-C4 radiation temperature: 1000oC
Melted Aluminum Splash D1-D3350g Melted Aluminum: 700oC
Melted metal splashing E1-E3200g molten iron: 1300oC
Flame retardant protective clothing
This standard establishes a flame retardant index (grades 1 to 3) for the flame spread properties of fabrics and accessories used in chemical protective clothing. Flame Retardant Index The 3rd grade fabric will not burn in case of fire and will not form holes.
High visibility warning suit
This standard specifies the performance, minimum area and location of reflective materials used on high visibility warning suits, including procedures and methods for testing materials in the laboratory. The level of high visibility warning clothing (1 to 3), the minimum area requirement for materials that constitute high visibility warning clothing.
Level 3 Level 2 Level 1
Basic material 0.800.500.14
Retrograde material 0.200.130.10
Cold-proof overalls
This standard covers the general requirements and performance test methods for cold-proof overalls (temperatures below -5oC, eg -20oC, -40oC).
Cold environment protective clothing
This standard specifies the general requirements and performance test methods for cold-resistant overalls above -5oC. This type of cold-proof overalls can be used for outdoor work and indoor work. This type of cold-proof overalls is not absolutely selected for airtight or watertight materials. Therefore, the requirements specified in the standard are not mandatory.
kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets.com