1. Insert the car inverter into the car cigarette lighter socket. When inserting, please check the tightness between the plug and the socket. When too loose, open the tabs on both sides of the plug and insert them into the cigarette lighter socket.
2. Confirm that the power indicator of the car inverter is lit.
3. Plug the power plug of the appliance to be used into the socket of the vehicle power converter.
Precautions:
1. When unplugging the electrical plug in continuous use, be sure to confirm that the switch that uses the appliance has been turned "off", and then unplug the power plug.
2. When replacing the fuse of the vehicle inverter, be sure to use the fuse of the same type and specification. If the fuse or wire other than the specified specification is used, it will cause abnormal overheating and fire.
3. Clean the dirt at the plug of the car inverter in time to avoid causing poor contact or abnormal overheating of the converter.
4. When using or not using the car inverter, unplug the car inverter from the cigarette lighter socket and keep it in a safe place.
Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com