About integrated ceiling knowledge

Aluminum plate material and surface treatment:

Currently on the market home improvement products

1. This is the most basic and traditional method of spraying. This kind of product is made of powder and ink adhered to the surface of aluminum plate. After the product is baked at high temperature, the adhesion is not very strong, and it is easy to change color because this is the earliest product. There are fewer people in the market today.
2, film is also very rich in color, is a PVC film, attached to the surface of aluminum alloy products, its color is very large, according to your different decoration style to choose its color.

3, roller coating, which is also a paint "paint, is imported paint, attached to the surface of aluminum products, roller coating product adhesion is very strong, the color is very realistic, to maintain a very long life. If the quality is not good aluminum buckle In the production of panels or small workshops, netizens may cause pollution in the living room due to excessive benzene, and other materials are also different, such as the use of aluminum, why the market has very cheap metal ceiling products, that is, aluminum is not the same, the surface treatment is not Too much.
4. Titanium This product is an imported product. The biggest feature of titanium products is dust and scratch resistance. Titanium is its name, indicating that its metal texture is stronger, and the strength of this product aluminum is better than ordinary products. After special treatment in foreign countries, this is a more characteristic product.

Integrated ceiling installation time and sequence of kitchen and sanitary tiles will be completed. The next step is to install the aluminum buckle plate. On the day after sticking to the wall tile, you can call the aluminum buckle plate manufacturer to make a call to the measuring ruler on the day after the call. Aluminum buckle plate manufacturers will come to measure, after 3-5 days can be delivered and installed.
Before installing the aluminum buckle plate, if the bathroom water heater is half wrapped in the aluminum buckle plate, it needs to be installed in advance. When fixing the water heater, it is best to use an expansion bolt to fix directly from the top of the coagulation, which can reduce unnecessary resonance. In the kitchen, the hose above the hood is fixed so that the ceiling is not opened.

Brand importance:

Many consumers have expressed their opinion that aluminum buckle boards do not have too high technical content, and do not even require good quality standards. Some consumers even say that they do not pay attention to the brand, and they are even more wrong. First of all, the word "brand": the brand contains too much content, one can become a brand of products, it is after many years of good quality assurance, after-sales service guarantee, credit guarantee, product replacement and so on comprehensive reflect. Only when the consumer can guarantee and persevere in the service can he get the brand product. A good product can be a well-known and well-known brand, which is to be recognized by many aspects of high-quality management and good reputation, so any product has a brand. The difference between a brand and a brand is, in a sense, the distinction between quality and service.

For example: aluminum buckle plate brand products:

1, the plate for China's southwest high-quality aluminum to ensure the flatness of the board and the flexibility of the board.

2, the surface treatment of the plate is suitable for imported film or roller coating process to ensure the vividness and stability of the color.

3, processing technology: all steel mold, keel and plate buckle combination of flat, strong and strong, not because of the installation of lights or exhaust fans, such as the impact of flatness or tripping phenomenon. Ensure the accuracy of the product.

4. Star-building construction after-sales service: There are problems in 24 hours and immediately go to the scene to solve. Any quality and service problems of the manufacturer should be paid in advance so that your consumption can be fully protected.

The above branded products are generally priced from 90 to 160 yuan in the market, and the national standard thickness is 0.6 mm. Please do not mislead the store for some non-standard operations. You can use a micrometer to get past the card or a professional to help check it.

In the industry, Lesilong aluminum gussets can be said to be the father of aluminum gussets. It is one of the top 500 companies in the world. Its aluminum gussets are the leading products in the industry. We can see special-shaped buckles and conventional buckles in high-end locations such as airports, office buildings and banks. If there is no high quality and technical standards, how can it be recognized, and how can we do such a difficult product? Therefore, aluminum buckle board products not only have high technical content, the world's most stringent quality standards and its environmental protection requirements, but also home decoration, tooling and other decorative> decorative areas of one of the important development of the product. Its standard home improvement product thickness is 0.6mm to become the corporate standard in this industry, please refer to it.

Please consider carefully when choosing the aluminum buckle board, and do not let your warm home appear flawed.

In fact, there is a difference between good quality and poor quality in any kind of product. Even if you buy a paper cup with a few cents and a few cents, is the quality different? A few cents worth of paper cups I've used. I just fell into the water and didn't drink. The cup has begun to leak. A few cents' worth of paper cups are not only beautifully crafted, but also exquisitely colored. It won't leak water, and other big categories of products are self-evident. , so I said that any product has a good or bad difference, right? So it depends on how the consumer's consumption standards determine what you are buying. I believe that most people still think that like me, it costs less money, and it is less annoying. One guarantee is the most affordable.

The installation of an integrated aluminum gusset is a test of the tiling.
Why do you say that? In the regular installation of the aluminum gussets, the corners are not glued to the tiles, but are punched and set on the wall. In the process of setting the corners, if the drill bit is broken on your tile, the tiles are broken. Say, your tile has empty drums, quickly call it a tile re-post it, or fall suspect in the future. Then there is the corner on your wall and you can immediately feel if your tiles are flat. This is the same as using a ruler.

The first question of the aluminum buckle ceiling is first. After the installation, it is found that there is a thin seam between the individual panels. It is basically that the installer is not installed. The installation technology of a worker is not in place and the keel installation is uneven;
Secondly, there is a problem of large seams in large areas. It is very likely that the aluminum gussets and keels you have bought are not complementary products. (For the moment, there are many vendors that are able to make more profits and use some other factories to make cheaper products. Keel.Please carefully purchase the supporting keel produced by regular manufacturers, the board is very tight after being buckled, and the pitch of the keel and plate is also very accurate.

Second, after installation, it was found that the corners had curled up parts, or the glue was opened in less than two weeks.
There are generally two ways to install corners:
First, using glue, this method was used as a common method several years ago and it was fixed by this method. However, some workers may have the situation described above due to insufficient glue or poor glue quality during installation. This method is now generally used by regular companies. Because of too many sequelae.
Secondly, first make a hole in the wall, align the hole in the corner with the hole in the wall, and then fix the corner on the wall with a nail. The advantage of this method is that the glass glue is not used and it is fixed more firmly. Not easy to fall off. However, fixing with this method requires the owner to ensure that there is no problem with the wall tiles and that there will be no void. If the wall tiles are pasted with holes, it is easy to crack the wall tiles. So this side can also test the paste technology of the wall tiles.

3. After the installation, you find that the board on the edge is touched by hand and it goes up.
This is often due to the fact that the workers did not open the bayonet on the corners. Sometimes due to the carelessness of the workers, the problem was forgotten. Therefore, this is also one of the criteria for checking whether your home aluminum buckle is lifted. What did you like to buy? After ten years and twenty years, it was still the same.

The above conclusions are the problems that I encountered in the ten years of work experience in this industry. If there is any deficiency, please give pointers.