What conditions must be met for wood floors suitable for geothermal heating

Experts believe that the choice of geothermal floor should be determined according to the particularity of geothermal heating methods, adapt to repeated changes in heat and heat and conducive to heat conduction, it is best to meet the following points:


Kanghui solid wood flooring

1) Good dimensional stability

This point to see the wood floor of the substrate density and internal bonding strength, the higher the internal bonding strength, indicating that the wooden floor to withstand the temperature change ability is better, will not occur cracking and other phenomena, only the substrate is relatively dense wood, can guarantee the wood floor Long time no cracking or deformation under high temperature.

2) Not afraid of damp environment

Wooden floors used for radiant heating on hot water surfaces require small dimensional changes at high temperatures and a water swelling rate of 2.5% or less. In general, the smaller the expansion rate, the better the moisture resistance of wood flooring.

3) formaldehyde emission can not exceed the standard

It is required that the amount of formaldehyde released will not exceed the standard in the condition of prolonged heating. When consumers choose geothermal floors, they must choose wood flooring with low formaldehyde content as much as possible. Because the higher the temperature, the greater the amount of formaldehyde released, in a relatively closed residential room, coupled with the release of formaldehyde caused by other indoor materials, indoor formaldehyde may exceed the standard, causing harm to the human body.

4) Faster heat transfer

Currently, there are not many brands on the market that can provide thermal conductivity values, and consumers should pay attention when buying. In general, thermal conductivity products perform better in terms of thermal conductivity.

5) High temperature resistance

Because the floor is subjected to high temperature heating for a long time, the performance of the decorative layer of the product is required to be stable. Under the conditions of high temperature for a long time, there will be no fading, rough light, and aging phenomena.

Flooring purchase Del flooring Nature Floor Formaldehyde Decoration

Led Panel Light

Led Panel Light,Led Surface Panel Light,Flat Panel Led Lights,Led Panel Ceiling Lights

OLAND PHOTOELECTRIC TECHNOLOGY CO.,LTD. , https://www.olandlights.com

Posted on