Thickener for Disperse Dye Printing

  • Model NO.: Thickener for Disperse Dye Printing
  • Appearance: Liquid
  • Ionicity: Anion
  • Solid Content: 40min
  • Specification: 150-160KG/DRUM
  • Kind: Synthetic Thickener
  • Application: Textile Printing Auxiliary, Dying Auxiliary
  • pH: 6.5-7.5
  • Trademark: Ruiguang
  • Origin: Weifang China
Disperse dye printing thickener RG705200 is a new generation of high efficiency synthetic thickener which was researched and developed by our company. This thickener was widely used in disperse dye printing. It also has a certain advantage in direct printing. Its printing result achieved and better than similar products, can replace sodium alginate. It was easy operation and safety when using.
If use thickener RG - 705200 replace sodium alginate, will make printing factory obtain remarkable economic and social benefits.
Major ingredient:synthetic high polymer
Physical and chemical index:
Appearance:light yellow sticky liquid
Ionicity:Anion
P H Value:6.5-7.5
Solid content:40% min
Application:
1.     Can be prepared into paste of 3~5 by water. The method is gradually add quantitative RG705200 to contained water of 1/3 volume of the container, then stir with high speed, then gradually add water to the required stickiness. Or can stir the preparation paste with high speed, then gradually add RG-705200 to the required stickiness.
2,Firstly dissolve the dye into right amount of water evenly, and add enough water according to ratio, then add RG-705RA gradually under high speed stirring, until reach to the required viscosity, use it after filtering.
 
3,Reference Formulation:    Disperse Dye         0.5~6.0   
RG-705200           2.0~6.0
                            Water                X
Total                100
Thickener for Disperse Dye Printing
Thickener for Disperse Dye Printing
Thickener for Disperse Dye Printing

Clear Transfer Vinyl

It's made of transparent PVC film, acrylic pressure sensitive adhesive, release paper. The appropriate initial adhesion design makes painting peeling easy, and paste convenient and smooth.

When it is used, the transfer film should stick  in the dust place to reduce its viscosity, and then paste the material to the destination location.

Product Name
 Clear Transfer Vinyl Film
PVC Thickness
 80mic etc
Color
 Transparent
Surface
 Glossy
Release paper
 100g etc
Size
 1.22*50m etc
Application of transfer vinyl

1) It is widely used in transferring pattern/word/letter

2) Step:

1.Tear off transfer film, cover pattern

2.Pressure, maintain flat

3.peel the transfer film and pattern gently ,flatten the pattern

4.Flatten the pattern,stick the pattern to the location you want

5.Finally,peel the transfer film gently


clear transfer vinyl film

Clear Transfer Vinyl Film

Clear Transfer Vinyl,Transparent Transfer Vinyl,Pvc Clear Transfer Tape,Clear Transfer Tape

Dongguan Vasin Adhesive Products Co., LTD , http://www.vasin-vinyl.com

Posted on