During the renovation, people are more and more fond of decorating a partition that they like, because the partition can make our space have a clearer boundary, but there are many kinds of partitions and materials. We are very troublesome in choosing it. In fact, now the glass partition is very popular with everyone, then let Xiaobian introduce the glass partition for everyone. When choosing the glass partition, the thickness of the glass partition is very important. Xiaobian first introduces the thickness of the glass partition . What is it? Let me introduce you to the decoration points and precautions of the glass partition.
First, glass partition thickness reference introduction
1, 3--4 PCT glass partition, mm is also called PCT in daily life. The 3 PCT glass we refer to refers to glass with a thickness of 3 mm. This type of glass is mainly used for the frame surface.
2, 5--6 PCT glass partition, mainly used for small-area light-transparent shapes such as exterior wall windows, door fans, etc.
3, 7--9 PCT glass partition, mainly used for indoor screens and other large areas but also frame protection.
4, 9--10 PCT glass partition, can be used for indoor large-area partitions, railings and other renovation projects.
5, glass partition wall using tempered glass, mainly for safety reasons, glass thickness is not the same, single-layer glass with 10MM or 12mm tempered glass, some models can use 8MM, Luban wall 85 glass partition with 8MM Tempered glass. The double-glazed wall is made of 5MM and 6MM. Double-glazed partitions can be combined with panel partitions, and the panel thickness is 10mm.
Second, the decoration points of the glass partition
1. The color of the glass pays attention to the overall style of the room: the glass is mostly used as a glass with a strong decorative effect, and through the fantastic color transformation, it creates an extraordinary artistic effect. Therefore, if the decorative glass partition is used, it is important that the color tone be consistent with the overall decoration style of the room.
2, the area of ​​the single piece of glass should not be too large: if the whole piece of glass is not used, when the area of ​​the single piece of glass is too large (such as more than 1 square meter), there is a relatively large safety hazard from the architectural point of view, therefore, While not affecting the overall effect, the glass should be cut into small pieces as much as possible, or the proportion of the frame should be appropriately increased to reduce the probability of the glass colliding.
Third, the glass partition installation precautions
1. Any decoration will involve the size, and the partition installation is no exception. At the beginning of the design, it is necessary to locate the specific position at which the glass partition is installed, and the position is clarified to start measuring the size. First draw the positioning line on the installed ground, and then draw the height position line on the wall or the column. When marking the line, be careful, try to reduce the error as much as possible to avoid unnecessary trouble for the installation program. It is necessary to repeatedly review the actual size of the site several times in order to ensure the accuracy of the installation position and the accuracy of the material selection.
2, first of all, the position of the elastic line, the first is to decide where to install the glass partition, then draw the line on the ground, draw the position line, and then use the vertical line method to pop the position and height line on the wall or column, if there is The frame glass is cut off, and the position of the vertical interval and the fixed point is also marked.
3, the installation frame, the combination of glass wall frame has two ways, one is the smaller partition wall area, this one is now assembled on the flat ground, and then the overall installation and fixed. The second type is a relatively large partition wall. This partition wall must be built directly along the ground and along the top. At this time, it is necessary to install from one end of the shelf. If the frame of the glass partition is an outer veneer, the frame should be installed according to the position that has been found. The metal expansion bolt must be welded firmly after the inspection, and the steel material must be pre-treated before installation.
The thickness of the glass partition is generally small, the decoration points of the glass partition and the precautions for the installation of the glass partition are introduced here. I believe that everyone will have a certain understanding of the thickness of the glass partition after reading the article above the small series. Also want to know more about home improvement information, please continue to pay attention to, decoration home network.
More related wonderful reading:
How to choose the size of the glass partition? What are the glass partition sizes?
Glass partition aluminum profile features, glass partition common sense introduction
Glass partition louver advantages glass partition louver cleaning
Advantages of glass partitions, material selection for glass partitions
Glass partition door installation step glass partition door material
Dish Rack,dish drying rack,kitchen dish rack,dish drainer rack,dish rack sink,etc. The materials used are 304 stainless steel, easy to clean, never rust!
China Kichen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kichen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
kitchen dish rack,dish drainer rack,dish rack sink,Kitchen drying rack,Stainless steel drying rack
Shenzhen Lanejoy Technology Co.,LTD , http://www.wirefruitbasket.com