2014 Hot Saletitanium Dioxide TiO2 Buy Titanium Dioxide

Model NO.: R218
Matter Soluble in Water: 0.5%
Residue on Sieve 45µm: 0.1 %
pH of Aqueous Suspension: 6.5-8.5
Brightness: 96%
Oil Absorption: 21g/100g
Tinting Strength,Reynolds Number: ≥1800
Trademark: Yuejiang
Specification: 25kg/bag
Origin: Shanghai, China
HS Code: 3206111000
Within the rich experience dealing with World TOP 500 companies like BASF, we have the confidence to offer you the most suitable titanium dioxide with excellent service.


Products made by titanium dioxide Rutile R218
Decorative coating(Exterior), Coil coatings, Water-based paint, Oil-based paint, General Industrial paints, plastics (PVC, PE, polystyrene and polyurethane), masterbatch, rubber, Water-based printing ink and paper


Main Property
Good whiteness
Good dispersion
Excellent weather resistance ability
High tinting power


Titanium dioxide Rutile R218 Spec


Property R218
TiO2 content %≥ 94.0
Rutile content %≥ 98.0
ColoL*(compared with standard sample)Not lower than
Matter volatile at 105º C %≤ 0.5
Matter soluble in water %≤ 0.5
Residue on sieve 45µ M %≤ 0.1
PH of aqueous suspension6.5-8.5
Brightness %≥ 96
Oil absorption g/100g≤ 21
Tinting strength, Reynolds number ≥ 1800

Safety Gloves

There are many kinds of protective gloves. In addition to chemical resistance, there are also anti-cutting, electrical insulation, waterproof, cold resistance, thermal radiation protection, fire retardant and other functions. It should be noted that the general acid and alkali resistant gloves are not the same as the chemical resistant protective gloves. So when needed, you should choose protective gloves that prevent all kinds of chemicals from penetrating.

The correct use of
1. Check whether the gloves are damaged before each use
2. Wear protective gloves before handling harmful substances or operating dangerous procedures
3. Avoid exposure of pollutants and contact with the skin after removing the contaminated gloves
4. Contaminated gloves should be wrapped before being discarded
5. Reuse protective gloves should be thoroughly cleaned and air-dried after use
6. Choose gloves of the right size
Maintenance method
1. Put protective gloves in a dry, dark and constant temperature environment
2. When there are a large number of chemical substances remaining, use appropriate solvent to clean, but avoid using corrosive cleaning fluid
3. Dry the gloves thoroughly after washing. Do not use heat to dry the gloves unless instructed by the manufacturer, as it will age the gloves quickly
Proper use and maintenance can properly increase the service life of protective gloves.

IMG_0320




safety gloves and goggles,safety gloves electrical work,safety gloves for woodworking,safety gloves rubber

Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com

Posted on