Before custom cabinets, most people will go to the showroom to see the cabinet. In the process of looking at the cabinets, we focused on and inquired about the styles of cabinets, plate materials, hardware, etc., while environmental protection and after-sales services are often overlooked. Building materials experts suggest that consumers should make advancement and detour before customizing the mistakes of cabinets.

Brand Stores: UOB Cabinets

Misunderstanding 1: Too much emphasis on style

"This is still quite beautiful, how much money?" This is a word that can often be heard in cabinet exhibition hall. When entering the showroom of the cabinet, many consumers first saw the style and color of the cabinet, and they only asked for the price and material. Many salesmen also introduced to consumers at the first time: "Look, do you like this style?" "If you do not like this color, we have other colors for you to dazzle" salesman at the time of shopping guide, style And colors are often an important part of what they lead consumers. Most salespeople will introduce the details of the cabinet's plates, crafts, hardware, etc. after the consumer has selected the style.

Expert interpretation: style is just a reference

Due to the fact that it is not limited by walls and columns, plus the lighting effects and the large area of ​​the exhibition hall, how the sample cabinets in the exhibition hall look good. In fact, due to the influence of the size of the kitchens and windows of consumers' homes, cabinets rarely exhibit the effect of the exhibition halls.

The designer needs to design the cabinet style according to the specific size and space of the room, and it needs to consider whether it matches the style of the home decoration. Whether the cabinet needs extra decoration and personalized design, whether the space layout needs to be changed, and whether or not to decide according to the lighting conditions of the kitchen To install lamps, and if there are children in the home need to consider the safety of cabinets, etc., so almost every set of cabinets are different.

When choosing cabinets, consumers should use the style of the cabinet as a reference, mainly considering whether the color matching and suit are like, how the configuration of the hardware is, whether some individual design or characteristics are in accordance with their own needs, and so on.

Links: Qi Family Photo Show: How to build a mini kitchen

Cabinets Spaces Home Improvement Painted Marble Room Cabinets Doors Marble Cabinets Drawers Cabinets Doors Kitchen Doors

Optical Coatings

• Single + Dual Wavelength AR Coatings (VAR / DAR):A single wavelength V-coat will provide reflectance less than 0.25% for 0° incidenceor 0.5% for 45° incidence at the chosen wavelength. Dual wavelength coatings will approach the performance of V-coats for two selected wavelengths. They are useful for optics which must transmit a visible alignment laser as well as a UV or near IR process beam. It is also useful for transmission of fundamental and first harmonic wavelengths.
• Broadband-AR-coatings:Anti-reflection coatings are offered to reduce surface reflections to a minimum. Two types of broadband coating are offered. A single layer of MgF2 on Fused Silica or BK7 reduces reflections per surface to about 1.5% over a broad bandwidth. If lower reflectance is required a multilayer broadband coating will provide an average reflectance less than 0.5% per surface.

• Protected + Enhanced Metallic Coatings (PAL / EAL / PAG / EAG / PAU / EAU)

  Metallic coatings make very broad bandwidth reflectors. Usually it is best to protect the coatings with a durable dielectric layer as they are very soft and susceptible to scratching. The efficiency of metallic reflectors falls off at shorter wavelengths but this may be enhanced by the application of a multi-layer dielectric thin film stack. The table shows the reflectance of each of the metals without any protection or enhancement. Protected metallic coatings have a dielectric coating layer over the metallic layer to protect the coating from being oxidized in the air or from scratched. For enhanced metallic coatings, a stack of dielectric layers are added on the metallic coating to increase reflectance for a particular wavelength range.

• Dielectric High Reflective Coatings:

1. Broadband HR coatings provide an average reflectance of 99% over a broad range of wavelengths. These broadband mirrors may be used for white light or multi-spectral applications.
2. Single wavelength, high power HR coatings are suitable for intra and extra cavity use. They provide the ultimate high reflectance of Rs > 99.8% and Rp > 99% for a specific wavelength. They may be used as a rear cavity reflector or for extra cavity use in beam delivery or turning. Note that Lambda high quality visible laser cavity coatings are designed for low scattering.

• Dichroic Beamsplitters – Beam Combiners – Harmonic Separators (SPD / LPD / BC / HHS)

1. Separate or combine beams with different wavelengths:Separate or combine beams with different wavelengths. These dichroic coatings allow one wavelength region to be transmitted while they reflect another region. They may be used as illustrated to separate or combine different wavelengths. This can be useful when working with alignment lasers or frequency doublers.
2. Dichoric Beamsplitters:These long-pass and short-pass coatings may be applied to any optical component to separate or combine different wavelength regions. They are available for normal and 45° angle of incidence. These coatings are highly effective for the wavelength of interest, reflecting over 99%. While they transmit over 85% of other nearby wavelengths, they are not blocked over a broad spectral range.

• Highly Transmissive AR Coatings For FLIR Applications:

Metallic coatings make very broad bandwidth reflectors. Usually it is best to protect the coatings with a durable dielectric layer as they are very soft and susceptible to scratching. The efficiency of metallic reflectors falls off at shorter wavelengths but this may be enhanced by the application of a multi-layer dielectric thin film stack. The table shows the reflectance. of each of the metals without any protection or enhancement. Protected metallic coatings have a dielectric coating layer over the metallic layer to protect the coating from being oxidized in the air or from scratched. For enhanced metallic coatings, a stack of dielectric layers are added on the metallic coating to increase reflectance for a particular wavelength range.

• IBAR : IR Broadband AR Coatings : Coatings for 3-5 µm and 8 – 12 µm bands

Infra-red broadband anti-reflection coatings are offered for the two broad spectral passbands of 3 – 5 µm and 8-12 µm. Coatings are designed for the refractive index of the substrate so it is necessary to offer separate coatings for different substrate materials. Standard coatings are offered for Zinc Selenide and Germanium. These coatings are highly durable and can be cleaned repeatedly using normal optics handling techniques. They are suitable for high power laser use such as that emitted from a CO2 laser.

Optical Coatings,Optical Grade Coatings,Vampire Optical Coatings,Optical Interference Coatings

Lambda Research Optics ChangChun,LTD. , https://www.lambdachina.com