>>>Link: Experts Analyze the ceiling installation process
There are two main problems that are easily seen in plasterboard ceilings:
The first situation is about half a year after the completion of the ceiling, cracks begin to appear at the joints of the gypsum board. The solution is to make sure that the gypsum board is fixed in the unstressed state when the plasterboard ceiling is in place. The distance between the keel and the fastening screw must be strictly in accordance with the design requirements; care should be taken in the overall scraping of the putty, and the putty should not be too thick.
The second case is the irregular wavy ceiling. The surrounding grille or square corners of the suspended ceiling, or the shrinkage caused by the large moisture content of the wood, can cause uneven crowning. In addition, the keel joint is uneven and has a hard bend. The distance between the hanger or the reinforcement tends to deform the spur keel, and it also causes the ceiling to be uneven. The top of the wooden boom is chapped and it is not tightened when the boom is made of steel, which can cause irregular wave deformation. The lighter steel keel is best used for ceiling projects with large area.
To prevent ceiling arching, the ceiling timber should be made of high-quality soft wood, its moisture content should be controlled within 12%, the keel should be straight, there must be no transverse section through the section, ceiling construction should be leveled on the wall around the wall, install The level is based on the four weeks.
Ceiling installation
Mini Flap Disc
flap discs are widely used in automobiles, stainless steel products, metal products, glass manufacturing and other industries, and have special effects on welds, solder joints, flash, rust removal and surface polishing. The reason why the Flap Disc is so widely used is because it has five advantages that cannot be ignored:
1. The flap disc blades have high hardness, high strength and strong grinding ability during use.
2. The flap disc has low noise, low vibration and long service life during use.
3. The flap disc has strong wear resistance and long service life.
4. It is not easy to generate heat and burn parts during use.
5. The use of flap disc can improve work efficiency.
The related abrasive products we can supply is Flap Disc Adhesive, Flap Wheels , Sanding Belt , and Abrasive Machine such as Flap Disc Making Machine, Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine , Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
The flap disc blades can be used instead of resin Grinding Wheels and steel wire wheels. They have a good effect on rust removal, grinding and polishing. It is a good way to polish and remove rust. It is worth choosing!
Compared with the resin grinding wheel for fixed abrasives, it has the advantages of polishing and polishing at one time, shortening the operation time, saving the grinding cost, high efficiency, good heat dissipation, high grinding efficiency, reducing operator fatigue, increasing machine life, etc. It has strong elasticity, High tensile and bending strength and good grinding effect. The grinding speed is fast, the effect is good, and the noise during grinding is low. It is suitable for various industries or fields of manufacturing such as major metal parts factories and machinery factories. Good weather resistance, salt spray resistance and heat resistance, suitable for use in different regions.
Mini Flap Disc,Rotary Flap Wheel,50mm flap disc,Roloc flap disc,Stainless Steel Flap Wheel
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com