There are many wires that need to be buried in home renovations. The most common ones are power lines, telephone lines, network cables, television signal lines, and various lines of sound systems in our listening room. It is usually complicated to refurbish so that we cannot give enough attention to this piece. Not to mention the construction party, it is rare for a professional electrician to provide you with formal electrical construction. If these concealed works are not handled properly, they will bring endless troubles and even irreversible losses to the future of electrical construction and use in the future. Therefore, we need to understand and master some decoration knowledge, so as not to lose money and regret!
If your floor is paved, whether composite or solid wood (bamboo), I suggest you place the wire as far as possible on the corner of the wall behind the skirting board, but only in the wall plug, door or wall, etc. The line pipe leads to the back of the skirting board. There can be no dead curve in the middle of the line pipe. Leave the lead wire in the pipe. Wait until the floor is finished but the skirting board is not yet installed. After installing the skirting board, you will not see any traces of the traces. It is very beautiful.
>>> Links: Family homes need to go five routes
This construction method has the following advantages:
1, because the shop floor is carried out in the final stage of the renovation project, when the floor is re-threaded, it can effectively prevent accidental damage to the wire during the long construction period;
2, you can have more time to choose the right wire;
3, when you want to change the line, plus the line can be, remove the skirting board can be constructed, very convenient;
4, because the line pipe does not walk under the floor, so there is no need to cut off the wood keel under the solid wood (bamboo) floor (except for the line pipe and wood keel to match), thereby improving the construction quality, reduce or even avoid the solid wood (bamboo) floor The possibility of stepping on the ring; in the northern region can also prevent the broken keel, solid wood (bamboo) floor joints due to drying and affect the appearance;
5, can save most of the purchase of line management expenses. In fact, workers who lay floors are also reluctant to construct spider-like lines on the ground, because that will affect the speed and quality of construction. This is a construction method that both A and B will benefit from.
If your floor is paved, it is best to route the line. The function of the line tube is not only to protect the wire, but it also has the function of facilitating line changing. Therefore, in the middle of the embedded pipe, there must be no right-angled corners at first, and the problem of cornering must be solved so that the wires can freely move in the line pipe. Secondly, the line tube is preferably made of plastic coil (a kind of semi-rigid, semi-transparent, and commonly used in the construction of regular buildings), so that there is no joint in the middle of the line pipe, so that the line will not be stuck. If there must be a joint in the middle, use a head-and-head method to insert the joint, and be in the same direction. Then, during the construction period, do not hurry to thread through the line pipe. Instead, thread the lead wire first, and then replace the corresponding wire when the electrical installation is completed. The benefits of this construction method are self-evident.
Last but not least, it is the strong and weak electricity that separates the wiring. The power line is a strong electric power. The greater the load, the stronger the electromagnetic interference generated. Therefore, the power line should be separated from the weak current and low voltage wires as much as possible.
All of what I said above belongs to the minimum content of green decoration. As long as we request it, each decoration team should be able to do so unless they deliberately cut corners.
Hydropower renovation TV decoration home renovation residential floor tiles
China leading manufacturers and suppliers of Dry Bath Incuabtor,Bath Incuabtor, and we are specialize in Best Dry Bath Incuabtor,Dry Bath Incuabtor For Sale, etc.
Dry Bath Incuabtor,Bath Incuabtor,Best Dry Bath Incuabtor,Dry Bath Incuabtor For Sale
Zenith Lab (Jiangsu) Co.,Ltd , https://www.zenithlabo.com