There are many types of wavy rubber waterstops, and wavy waterstops are also one of them. This type of waterstop is also widely used. There are many manufacturers of wavy waterstops. When buying, be sure to choose a physical manufacturer, so that the price of the waveform water stop is low, and the quality is also guaranteed. Let's follow the editor of Hebei Tushun Rubber to learn about the wave shaped water stop!
Wavy rubber waterstop manufacturers are widely used in various types of concrete structures. For example: in underground projects such as dams, reservoirs, subways, culverts, and tunnels. In these projects, due to the inability to cast continuously, or the deformation of the foundation, or the thermal expansion and contraction of the concrete member caused by the ten-temperature change, deformation joints and construction joints are often left during casting, and these joints are leak-proof The problem should be solved by casting rubber waterstops at the deformation joints. It can prevent groundwater (or external water) from leaking into the building structure, and can prevent water in the building from leaking to the outside.
The function and principle of wavy rubber waterstop
The rubber stop belt uses the high elasticity of rubber to produce elastic deformation under various loads, thereby playing a strong seal, effectively preventing water leakage and water leakage of the building structure, and acting as a shock-absorbing buffer. In many engineering building designs, there are certain requirements for expansion and contraction between civil works and water and soil structures, and there are problems such as waterproof and shockproof. Therefore, the installation of rubber waterstops is an effective way to solve the above problems. This product is mainly used for foundation engineering, underground facilities, tunnel culverts, water conveying aqueducts, water retaining dams, etc., which are located in the construction joints and deformation joints when the concrete is poured, to ensure the service life of the project construction.
Wavy rubber water stop construction method Rubber water stop is partly or completely buried in the concrete during the concrete casting process. Before burying the concrete, it is necessary to keep the interface flat, the joint part is adhered and fastened, and then fully poured with appropriate force, and the concrete is shaken to locate the water stop to make it combine well with the concrete so as not to affect the water stop effect.
Hebei Tushun Rubber Products Co., Ltd. mainly produces: mid-buried rubber waterstop, steel-edge rubber waterstop, back-attached rubber waterstop, externally attached rubber waterstop, 651 rubber waterstop, 652 rubber stop Water stop products such as hose. The products of our company are all identified by the rubber product testing center. The products are of good quality and low price. Customers are welcome to call us!
================================================== ================================================== ======
13313081215 Manager Wang
Vertical Multistage Centrifugal Water Pump
Vertical Multistage Centrifugal Water Pump,Vertical Multistage Centrifugal Pump,Multistage Centrifugal Water Pump,Vertical Water Pump
Shanghai NuoSai Pump Manufacturing Co., Ltd. , https://www.nuosai.net