Completion acceptance of the project means that after the completion of the construction project, the development and construction unit will, together with the design, construction, equipment supply unit and project quality supervision department, conduct a comprehensive inspection of the project's compliance with the planning and design requirements and the quality of the construction and equipment installation, and obtain the qualified information for completion. Data and credentials. Then, what are the conditions for the completion acceptance of the project ? What about the program? Next, take a look!
Project completion acceptance conditions
After receiving the project completion report submitted by the construction unit and meeting the following conditions, the construction unit may organize the relevant personnel of the survey, design, construction, supervision and other units to perform the completion acceptance:
1. Completed the project design and contract stipulations.
2. The construction unit inspected the quality of the completed construction project, confirmed that the project quality complied with relevant laws, regulations and mandatory standards for project construction, complied with the design documents and contract requirements, and submitted the project completion report. The report shall be reviewed and signed by the chief supervision engineer (project for commissioned supervision), project manager and relevant person in charge of the construction unit.
3, there is a complete technical file and construction management information.
4. All the departments responsible for ordering rectification by the competent administrative departments for construction and the entrusted project quality supervision agencies have completed the rectification.
5. For the engineering project entrusted with supervision, there is complete supervision data, and the supervision unit submits the project quality assessment report. The report shall be reviewed and signed by the supervisory engineer and the person in charge of the supervision unit. For projects not entrusted with supervision, the project quality assessment report is completed by the construction unit.
6. The surveying and designing unit shall inspect the design modification documents signed by the design agency during the survey, design documents and construction process, and submit a quality inspection report. The report should be reviewed and signed by the person responsible for survey and design of the project and the relevant person in charge of the respective unit.
7. Acceptance approval documents issued by the departments of planning, fire protection and environmental protection.
8. The project quality warranty signed by the construction unit and the construction unit.
Project Completion Acceptance Procedure
1, application report
When the project has the acceptance conditions, the contractor can submit the report of the completion application to the supervisor.
2, acceptance
After the supervisor receives the completion acceptance application report submitted by the contractor according to requirements, the supervisor shall review the contents of the application report and handle it according to different circumstances.
3, unit project acceptance
According to the schedule of the contract, the contractor may perform the acceptance of the unit project when it needs to use the completed unit project before the completion of all projects, or when the contractor submits the agreement of the contract issuer. After acceptance, the supervisor will issue to the contractor a unit acceptance certificate signed by the contractor.
4, run during construction
It means that the contracted project has not been fully completed, and the installation of one or several unit engineering or engineering equipments has been completed, according to the terms of the special contract. If it needs to be put into operation during the construction period, it can only be put into operation during the construction period after the contractor has passed the acceptance check and is certified to ensure safety.
5, test run
6. Completed clearance
The above is the introduction of relevant contents of the project completion acceptance and I hope to help you. For more information on engineering completion, please continue to pay attention to the information on this site.
Water and electricity acceptance paint construction acceptance inspection
Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.
BBQ Grate,BBQ Mesh,BBQ Grill, grill grate,grill mesh
Shenzhen Lanejoy Technology Co.,LTD , https://www.bbq-grillgrate.com