| Home>Bearing knowledge>IKO joint bearing device after work inspection focus on the problem |
Imported IKO joint bearing device after work inspection is a problem
Source: China Bearing Network Time: 2017-09-29
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The primary reason for the IKO bearing to present a flaw in the process of the device is that the imported bearing exhibits an inner ring or an outer ring skew when the device is disassembled, or exhibits an impact load during the process of disassembly and disassembly; the bearing at the end forms a flaw.
In order to avoid the occurrence of scratches on the joint bearing in the installation; in addition to the use of the appropriate things in the process of the device or disassembly; also use the punch to avoid the impact load on the bearing; but also pay attention to the centering of the device.
In order to avoid damage to the IKO bearing in the work process; cause the equipment to stop; the formation is lost. Therefore, the bearing should be monitored.
Do a good job in the smooth bearing. If the IKO bearing is outstandingly smooth; and the correct insulation and moisture, the oil seal should not wear.
Of course; the best way to look at the imported bearings and check the oil seals when opening the bearing housing. Check the oil seals near the bearings; make sure they are sufficient to avoid hot liquids, corrosive liquids or gases entering the joint bearings along the shaft; if the oil seals have Wear and tear; should be replaced quickly.
When the IKO bearing is in an abnormal condition; it is generally expressed by high temperature. The high temperature is harmful to the smoothing agent in the bearing; the overheating of the joint bearing may also be a problem of the smoothing agent. If the bearing works for a long time beyond the temperature of 125 degrees Celsius; Will shorten the life of the imported bearings. Therefore; pay attention to the bearing high temperature problem.
The reasons for the high temperature of the bearing include: smooth or excessive smoothness, the magazine contains the magazine, the load is too large, the joint bearing is damaged, the gap is lacking, and the high temperature conflict occurs in the oil seal.
Recommend to friends comments close window
| Bearing related knowledge |
| "Characteristics of deep groove ball bearings" SKF Bearing Processing Parameters Rolling Bearing Specification: Rolling Bearing Residual Magnetic Skills Talk about the Preloading Mechanism of Rolling Bearings "FAG Imported Bearing Smooth Grease" Stability |
This article links to http://
Please indicate the bearing network http://
Previous:Scraping and protection of SKF bearings Next:The layout of precision instrument bearings
Integrated Gear Pump,Electro-magnetic drive pump,Ceramic printing pump,CIJ inkjet printer pump,Electromagnetic metering Pump
Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com