1. After entering the touch screen system, click to enter the "controlpanel" setting interface.
2, after entering the setting interface, double-click the icon named "OP".
3, click the "touch" option in the popup window. (Because there is no calibration, other options may be delayed.)
4, click on the "recalibrate" button under the "touch" option, click the cursor that appears in the screen that appears.
5. After clicking the cursor one by one, there will be a 30-second countdown. During this period, you just touch the screen, and then click “ok†in the upper right. The entire setup process is completed.
Note: In the control panel OP--TOUCH--Recalibrate, calibration crosshairs will be displayed in five positions. Touch the center of the calibration crosshair at each location. If the center of the calibration crosshair is not touched, this process will be repeated. After touching the calibration crosshairs in each location, a dialog box to touch the screen within 30 seconds will appear. The new calibration value will be saved. If it exceeds 30 seconds, the new calibration value is discarded and the original calibration value remains valid.
MP277 touch screen correction Siemens MP277 touch screen repair Siemens MP277 touch failure Siemens MP277 click touch screen offset MP277 touch screen does not move
2, after entering the setting interface, double-click the icon named "OP".
3, click the "touch" option in the popup window. (Because there is no calibration, other options may be delayed.)
4, click on the "recalibrate" button under the "touch" option, click the cursor that appears in the screen that appears.
5. After clicking the cursor one by one, there will be a 30-second countdown. During this period, you just touch the screen, and then click “ok†in the upper right. The entire setup process is completed.
Note: In the control panel OP--TOUCH--Recalibrate, calibration crosshairs will be displayed in five positions. Touch the center of the calibration crosshair at each location. If the center of the calibration crosshair is not touched, this process will be repeated. After touching the calibration crosshairs in each location, a dialog box to touch the screen within 30 seconds will appear. The new calibration value will be saved. If it exceeds 30 seconds, the new calibration value is discarded and the original calibration value remains valid.
MP277 touch screen correction Siemens MP277 touch screen repair Siemens MP277 touch failure Siemens MP277 click touch screen offset MP277 touch screen does not move
Features:
1) high brightness
2) Self-adhesive tape on each module
3) Energy efficient, major reduction in power costs
4) Low heat, high brightness, works well under harsh conditions
5) Long service life more than 50000 hrs, virtually no maintenance during lifetime
6) without lead, mercury, and other harmful substances; healthy, environmental friendly
Outdoor Led Module,IP65 Module Light,110V Led Module Light,RGB LED Module Light,Led Module With Lens
Shenzhen You&My Electronic Technology Co., Ltd , https://www.ymledtrade.com