Wardrobe is an indispensable living furniture in modern home life. What kind of wardrobe is used is good. This is a lot of people who are prepared to make their own closet are more concerned about, so the wardrobe is very large plate so we do not know what kind of plate for the wardrobe, In the closet furniture industry market, a variety of wardrobe panels. Its performance and features are also different, but still many people do not know what to do with a good wardrobe, the following with a small series to see what to do with a good wardrobe, what is the wardrobe green sheet for your reference.
A. Choose the plate for the wardrobe
1, decorative panel panel
It is a precision veneer of a solid wood board that is cut to a thickness of about 0.2 mm, with a splint as a base material, and a decorative sheet with a single-sided decorative effect produced by an adhesive process. It is a special way of plywood, with a thickness of 3mm. Decorative panels are currently an advanced decoration material that is different from the oil mixing practice. The plate is the main component of the wardrobe, and its quality directly determines the quality of the product. The wardrobe plate in the market mainly uses artificial boards, and the use of solid wood is rare. The artificial board is divided into plywood, particle board, and fiber board. Among them, fiberboard has high density, medium density and low density.
2, fire board
Fireproof board is made of siliceous or calcareous material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives, and decorated with autoclave technology. It is a new type of material that is currently being used more and more. Its use is not only due to fire protection. The construction of the fire board requires a relatively high requirement for glue sticking, and the fire board with better quality is also more expensive than the decorative panel. Fire board thickness is generally 0.8mm, 1mm and 1.2mm.
3, plywood
The line is commonly known as the fine core board, which is made of three or more layers of 1mm thick veneer or sheet glue. This is the most commonly used material in hand-made furniture. Plywood is generally divided into three kinds of plates, 5 PCT board, 9 PCT board, 12 PCT board, 15 PCT board and 18 PCT board of six kinds of specifications (1 PCT refers to 1mm).
4, MDF
Which type of board is best for wardrobes? Is it good to use a density board? Also known as fiber board, it is a man-made board made of wood fiber or other plant fiber as raw material, urea-formaldehyde resin or other suitable adhesive. According to their different density, divided into high-density board, medium-density board, low-density board. MDF is easy to re-process due to its soft and impact-resistant properties, but due to the fact that the national standard for high-density boards is several times lower than international standards, the quality of use of MDF in China is yet to be improved.
5, big core board
Called Blockboard. It is composed of two pieces of veneer that are spliced ​​together. The price of the big core board is lower than that of the fine core board, and its vertical direction (differentiated by the core material) has poor bending pressure strength, but the transverse bending strength is high.
What kind of plate environmental protection wardrobe
1. Particleboard and MDF are not comparable in terms of environmental protection. The difference between particleboard and MDF is that the substrate of the particleboard is not completely crushed into fibers, but rather is crushed into granules, also known as shavings, and then added with an adhesive. Made. The MDF is formed by completely comminuting the substrate into a fibrous form and adding an adhesive.
However, the chipboard is made by adding shavings with glue, so the density is not uniform, the middle is low, and the two are high, so the nail holding force is lower than that of the medium density fiberboard. And the surface of the MDF is finer and flatter than the particle board. The cost of the particle board is lower than that of the density board, so the particle board is cheaper than the density board.
2. Many consumers think that particleboard is more environmentally friendly than MDF
In fact, these two kinds of plates are made by hand, and are made by using wood processing crushing and incorporation of adhesives. The degree of environmental protection naturally depends on the degree of environmental protection of the glue. When consumers customize furniture, they are often misled by the sales staff in the store. Frequently, the salesman uses particles of the particle board to be large, and the amount of glue of the sheet is small. The density board is pressed with powdered fibers. The particles are small, and the adhesive required is more, and the particle board is naturally more environmentally friendly than the density board. In fact, the environmental standards of MDF and particleboard that meet the national standards are the same. There is no greenest one.
Editor's summary: What kind of plate is used as a wardrobe? For more information, you can follow this site information.
Whole wardrobe closet brand
Plastic base Tool Bag Tote is a type of tool bag that features a rigid plastic base to provide added stability and protection for the tools inside. The plastic base helps to keep the bag upright and prevents it from sagging or collapsing under the weight of heavy tools.
The rest of the bag is typically made from durable materials such as heavy-duty nylon or canvas, and it may feature additional pockets and compartments for organizing smaller items such as screws, nails, and drill bits.
Plastic base tool bag totes are popular among professionals in construction, plumbing, electrical, and other trades that require frequent transportation of tools and equipment. They are also useful for DIY enthusiasts and homeowners who need a portable and convenient way to store and transport their tools.
The benefits of a plastic base tool bag tote include:
- Increased stability: The rigid plastic base helps to keep the bag upright and prevents it from tipping over or collapsing under the weight of heavy tools.
- Enhanced protection: The plastic base provides an extra layer of protection for the tools inside the bag, helping to prevent damage from impacts or rough handling.
- Easy to clean: The plastic base is easy to wipe clean and resists dirt and moisture, making it ideal for use in dirty or wet environments.
When choosing a plastic base tool bag tote, it is important to consider the size and weight of your tools, as well as the overall durability and quality of the bag. We support custom storage space according to your requirements.
Hard Bottom Tool Bag,Plastic Base Tool Bag,Tool Bag With Hard Bottom,Tool Bag Hard Bottom
ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com