Feng Shui knowledge of bedroom furniture

 

The bed is one of the essential furniture in the bedroom furniture . Different rooms have different requirements for feng shui. What specific feng shui knowledge is required? What should be paid attention to when placing beds in the bedroom?

 

 

1. The bed cannot be mirrored. Because getting up in the middle of the night is easily frightened by the mirror image, and the spirit is restless, leading to dizziness. If there is a mirror-to-bed in the bedroom, you can cover it with decorative objects at night or turn it to the wall. It is best to embed the mirror in the interior of the bedroom wardrobe. It can be used flexibly.

 

Second, the bed and the bedroom wall should be parallel or vertical to avoid unpredictable movements and instability.

 

3. Wherever the bed is placed, the occupants should be able to see the bedroom doors and windows on the bed, and bright sunlight shines on the bed. This arrangement helps absorb energy from nature and is more conducive to physical health.

 

4. It is better to choose the orientation of the south gate of the bed to comply with the gravity of the magnetic field. Sleeping with your head facing south or north is good for health, because in the body's blood circulation system, the aorta and large vein are the most important, and its direction is consistent with the direction of the body's head and feet. When the human body is in the north-south water lily direction, the aorta and the large vein are the most necessary, and its direction is consistent with the direction of the human head and feet.

 

When the human body is sleeping in the north-south direction, the aorta and the large vein are facing, and the human body is sleeping in the same direction as the magnetic lines of the north and south of the earth. At this time, the person is most likely to fall asleep and the quality of sleep is also the highest. Therefore, north-south sleep has certain disease prevention and health care functions.

 

5. The bedroom door should not be directly opposite the bed, and the head of the bed cannot lean on the door or back door. This is because the doorway is also the tuyere, and people will inevitably be affected by the tuyere during sleep, and they are susceptible to illness or restlessness. Because of the need for a peaceful environment for sleep, the back door of the bed is easily disturbed and frightened.

 

6. The bedside table is higher than the bed, which is beneficial to enhance the wisdom of sleepers, improve the quality of sleep, and enhance the relationship between couples.

 

7. The head of the bed should be solid or not. The head of the bed should be against the wall and unreliable windows. If the bed is not against the wall, the headboard must have a headboard so that the head is not suspended, and the headboard surface cannot be a toilet or kitchen.

 

8. There should be no cross-beam presses, so as not to cause a sense of depression and damage people's physical and mental health. Such situations also include that there can be no beams pressing the bedroom door, the split air-conditioning indoor unit cannot be hung above the pillow position, and the pendant lamp cannot be hung on the front and back of the bed. These are all in the category of beam presses.

 

9. For the bed itself, it is necessary to consider whether the length and width are suitable for the human body, whether the bed surface is flat, and whether it has good support and comfort. The height of the bed is generally slightly higher than the knees of the sleeper. Remember that the bed should not be attached to the floor, and the bottom of the bed should be empty.

 

The above is the relevant information about the placement of Feng Shui in the bedroom, friends who need it can refer to it. (Editor: Peter)

 

Double-Convex Cylinder Lens

A double-convex lens is compose of two convex surfaces, has a positive focal length. Normally Bi-Convex lenses are most suitable where the object and image are on opposite sides of the lens, and are popular for many imaging applications.

Some styles of cylindrical lenses have antireflective coatings to increase the transmission of light through the lens. Fused silica cylinder lenses are ideal for demanding laser machining and medical applications.

We supply kinds of plano-convex Cylindrical Lens,plano-concave cylindrical lens,bi-convex cylindrical lens,bi-concave cylindrical lens,meniscus cylindrical lens,Rod cylindrical lenses,special cylindrical lens etc.Every sizes,materials cylindrical lenses are available according to your detailed parameters.

Double Convex Lens

Specification of our cylinderical lens as follow:
*Material: BK7,Ge,UV-grade fuse silica(JGS1,JGS2,JGS3)or other optical materials
*Dimension Tolerance: +0.0 -- -0.1mm
*Center Thickness: +/-0.1mm
*Focal Length Tolerance: +/-1%
*Surface Quality:20/10
*Surface Figure: lambda/2 at 633nm on plano side
*Clear Aperture>90%
*Chamfer: 0.25mm at 45 degree typical
*Coating Optional

Double Convex Lens,Double-Concave Cylinder Lens,Bi Concave Cylindrical Lens,Optical Glass Double-Convex Cylinder Lens

China Star Optics Technology Co.,Ltd. , https://www.opticsrealpoo.com