The auger transportation requires a low height of the factory, but there are residues. This kind of transportation method can arrange the materials with smaller components and higher price in the formula to the front of the auger to minimize the residue. Impact. There is no residue in the rotary distributor, but the plant is required to be higher, which increases the soil construction price.
When the technical transformation is limited by the height of the original plant, it is difficult to change the auger conveyor to the rotary distributor. In some places, in order to relocate the height of the original plant, the powdery raw materials sent by the hoist are transported by the auger and then fed into the batching bin by the rotary distributor. This method is not desirable because the advantages of the rotary distributor are offset by the auger. .
Pneumatic conveying has high energy consumption, high noise, easy to wear pipelines and elbows, and is generally less used. It is used more in the micro-pulverization section of fish and shrimp feed mills and the transportation of trace elements in minerals in pre-mixed feed mills. The conveyance of the finished powder after mixing is confirmed according to our actual test results. The auger conveyor is easier to classify the finished powder than the scraper. Therefore, it is best to use a scraper to transport.
Automatic Door Motor,Door Open Motor,Swing Door Motor,Gate Door Motor
Dongyang City Shuangchi Bearing Co.,Ltd , https://www.zjscbearing.com