In modern home decoration, the application fields of wall tiles are more and more extensive. However, for various reasons, after using the wall tiles for a period of time, the local tiles often fall or even fall off, which affects the use effect and leaves an unsightly "scar" on the complete wall and the ground. If this happens, you can use the following methods to fix:
1. If the mortar is not loose, only the tile is peeled off. After the mortar adhered to the back and the back of the tile is scraped, a small amount of cement is mixed into the paste in the 107 glue, and a thin layer is evenly coated on the back of the tile. Then press the tile later to stick it.
2. If the mortar is dropped together with the tile, firstly grind some pits on the original base surface, re-apply with mortar mixed with 107 glue, or use cement, E-44 epoxy resin, acetone, ethylenediamine. (sold in chemical stores) After mixing at a ratio of 5:3:2:1, brush a layer on the base with a brush, then press the peeled tiles until the mortar hardens.
It should be noted that if the tile is only partially peeled off, it is not possible to tap the mortar on the base surface to prevent the original tile from being loose.
Heavy Duty Caster,Heavy Duty Castors,Heavy Duty Caster Wheels,Heavy Duty Castor Wheels
JIANGSU SHENPAI CASTER CO., LTD , https://www.shenpaicaster.com