Hot oil pump is an ideal hot oil circulation pump or as a heat transfer pump, heat exchange equipment is the ideal matching pump. Magnetically-driven leak-free heat transfer oil pump in the original pump based on the improvement of sealing process using no leakage of high temperature magnetic seal so that heat-conducting oil pump life-long no leakage, the motor shaft and heat pump shaft oil without friction, so the heat pump in operation than normal Thermal oil pump low noise, more stable, longer life, to eliminate the past heat conduction oil pump running, run, drip, leak phenomenon. The same temperature can reach ≤ 400 ℃. Structural features: Hot oil pump adopts self-heating cooling structure, which changes the traditional water cooling structure, which makes the structure simple and small in size, saves the operation cost, has good performance and is reliable to use. It is the second developed on the basis of digestion and absorption of foreign oil pump in our country Substitute products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, and the same motor mounted on the base. The hot oil pump support adopts double-ended ball bearing support structure. The front end is lubricated with grease. The rear end is lubricated with grease. The middle of the oil pump is provided with a guide pipe for observing the sealing and recovering the heat conducting oil at any time. Seal characteristics of hot oil pump: (1) the combination of packing seal and mechanical seal, packing seal with high temperature filler, has good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance Carbide material, to ensure the sealing performance under high temperature conditions. (2) Imported polytetrafluoroethylene (referred to as PTFE) lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely strong corrosion resistance. (3) magnetic drive leak-free hot oil pump on the basis of the original pump to improve the sealing process using no leakage of high temperature magnetic seal so that heat-conducting oil pump life-long no leakage, the motor shaft and the heat pump shaft without contact, no friction, so the heat transfer oil pump is running Medium than the average heat pump low noise, more stable, longer life, to eliminate the past heat pump running, running, dripping, leakage phenomenon. The same temperature can reach ≤ 400 ℃. Applications: Heat pump technology is advanced, high efficiency, long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, and other features in China's heating system heating system has been widely used, has entered the oil It is mainly used for conveying weakly corrosive and high temperature liquid without solid particles. It is an ideal hot oil with temperature ≤400 ℃ Circulation pump.
Stainless Steel Wire,Stainless Steel Wire Mesh,Stainless Wire,Stainless Wire Mesh
ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyu-wiremesh.com