Pulse electromagnetic valve refers to the electromagnetic or pneumatic pilot valve control, can open and close the high-pressure gas source in an instant pulse diaphragm valve. Installation and commissioning All the valves in the electromagnetic pulse valve can not be opened, but the pilot part is in motion Check whether the pressure in the bag is too low Check the leak Some valves do not work Other valves Check the wiring of the valve and coil replacement fittings All valves can not be closed, Air bag pressure can not be established submerged valve, the same air bag of a few valves Leakage caused by all the valve leaks of falsehood Check the leaky rectangular valve, the valve inlet and outlet opposite installation Reinstall some valves Can not be closed, there is leakage valve, slowly closing the impurities adsorbed on the diaphragm Clean the diaphragm Check the diaphragm is complete Moving core stuck phenomenon Check the moving core and the diaphragm Diaphragm throttling Dirt block section Flow holes in the process of using some of the valves leak gas diaphragm off the valve often open impurities adsorbed on the diaphragm clean the diaphragm Check the diaphragm is complete coil fever burned Pilot damaged moving iron core stuck phenomenon Power for a long time check moving iron Core and gas plug and other parts in time to replace Check the working condition of the control system Voltage but the valve does not move Diaphragm damage or blocked when the replacement parts Temperature below -10C ° valve leak or can not With ice phenomenon ambient temperature is too low to open the valve. The role of electromagnetic pulse valve: that is, the size of the hydraulic oil in the control. Generally installed in the main oil or shock absorber back pressure oil to reduce Gear shift and lock the oil pressure when the unlock, so that equipment operation to maintain a steady state.
Changzhou Longfu Knitting Co., Ltd. , https://www.circularmachine.com