The Beijing Meteorological Bureau released the agricultural weather forecast in late February today, and it is expected that there will be a sleet weather in the next ten days. The average temperature in the plains of the city is 0~1°C (the average annual temperature is 0.3°C), and the extreme minimum temperature is -6°C. The precipitation in most parts of the city is 0 to 3 mm, and the annual precipitation is 1.8 mm.
Main weather process:
February 24: There is light rain and snow in the area of ​​the Yin;
Around February 28: sleet.
Agricultural production advice:
Winter wheat: Although there is precipitation in this period, it is difficult to completely eliminate the dry soil layer of the wheat field. The drought-resistance measures should be taken to increase the ground temperature and increase the sensation. In addition, the wheat field with a dry soil layer of more than 6 cm should have a maximum temperature of more than 5. A small amount of water is added in the afternoon of °C.
Vegetables: Most of the sunshine in this period is less, but most of the main producing areas are slightly more flat. It is still beneficial to the growth of protected vegetables. The vegetables grow normally during the period, and no obvious diseases occur.
Fruit trees: The weather in this season has no obvious effect on the wintering of fruit trees. Fruit trees that have not yet completed winter shearing should be pruned in time, and appropriate fruit branches should be kept to meet their flowering needs. Fruit trees that have not been fertilized before winter should be fertilized at the right time.
Acrylic mounting systems have a short cure time and are recommended for high pressure and high temperature sensitive sample installations. Buehler's products include acrylic liquids, powders and kits for various metallographic sample testing applications.
Samplkwick-acrylic mounting compound is designed to package PCB samples quickly and efficiently. By immerging the sample in an acrylic liquid prior to potting, Buehler's SamplKwick wets well and enters smaller holes and grooves, easily providing the edge holding required for good permeability and excellent electronic preparation. In order to reduce the viscosity of mixed acrylic acid, the optimal volume mixing ratio of powder to liquid is 1∶1 or 1.5∶1.
VariKleer- ideal for use with pressure vessels, produces a clear acrylic coating that hardens and reduces shrinkage, ensuring that PCB sample samples are ground to the desired level. For transparent installations, use SamplKup instead of EPDM or a one-time installation.
VariDur- is a quick system of acrylic fillers with short curing cycles compared to epoxy resins where edge curing is not critical and is particularly suitable for hardening of metal samples.
Cold Mounting Consumables,Cold Mounting Metallography,Cold Mounting Epoxy Resin,Cold Mounting Procedure
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com