Fig. 1 is a schematic view of the milling process of the Screw plug part. As can be seen from the figure, the part is small in size, and the positioning surface is limited by the circular boss and the contact surface of the clamp is small, and the part is easy to swing. Since it is a milling groove, the top surface must be pressed from both sides of the groove, and the contact surface between the pressure plate and the part is narrower and the pressure is not firm. In order to solve the above problems, the milling fixture designed and manufactured by us has solved these two problems better.
Brass knurled insert Made of brass material, good thermal conductivity and heat resistance.
Widely Used On the Molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection
China Knurled Nut,Knurled Brass Insert Nut,Copper Knurled Insert Nut,Brass Knurled Insert Nut, we offered that you can trust. Welcome to do business with us.
Brass Knurled Nut,knurled thumb nut,knurled brass nut,Copper Knurled Nut,insert knurled nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com