Main products: gas masks, air respirator, long tube respirator , electric send long tube respirator to take out special waist, straps, according to the wearer's body size, moderate adjustment of the belt, straps, so that the position of the waist valve, escape bottle On both sides of the human body's waist (note the direction of the waist valve, the quick socket should face upwards). It is advisable to wear it comfortably without obstructing the arm movement. First, insert the quick socket on the gas supply pipe from the bottom up into the quick plug of the lumbar valve, and then insert the plug of the mask-supply valve into the quick socket of the lumbar valve, or without wearing the lumbar strap. Previously, the joints of the mobile air source and the mask were connected directly to the waist-to-waist valve. Open the cylinder valve of the mobile gas source, wear a breathing mask, and breathe freely into the work site. If two people are using at the same time, they should wait for all two to wear fully and enter together, and pay attention to maintaining the distance and direction, to prevent the occurrence of mutual traction and accidents.
Long-pipe respirator users should be fully trained to wear it. Before use, it is necessary to check whether the pressure of each air source meets the requirements of working pressure. In addition, wear inspections are strictly performed routinely. It is found that failures or hidden dangers of breathing apparatus, mobile air source, and escape source cannot be forcibly put into use. In the course of use, if you feel the lack of supply of gas, poor breathing, or other discomfort, you should immediately withdraw from the scene, or open the evacuation source.
During use, the long tube on the air source of the long tube respirator should be properly protected to avoid contact between the long tube and sharp sharps, corners, corrosive media, or friction with rough objects during dragging. Bad, scratched air supply pipe. If you inadvertently come into contact with corrosive media, clean and dry it with clean water immediately. If the supply air pipe is damaged, replace it immediately after damage.
If the air source car of the long tube respirator cannot follow the user closely, the guardian should be arranged for monitoring to check the air source and inform the user when the air source is about to run out and an alarm is issued and an accident has occurred.
Long-pipe respirator users should be fully trained to wear it. Before use, it is necessary to check whether the pressure of each air source meets the requirements of working pressure. In addition, wear inspections are strictly performed routinely. It is found that failures or hidden dangers of breathing apparatus, mobile air source, and escape source cannot be forcibly put into use. In the course of use, if you feel the lack of supply of gas, poor breathing, or other discomfort, you should immediately withdraw from the scene, or open the evacuation source.
During use, the long tube on the air source of the long tube respirator should be properly protected to avoid contact between the long tube and sharp sharps, corners, corrosive media, or friction with rough objects during dragging. Bad, scratched air supply pipe. If you inadvertently come into contact with corrosive media, clean and dry it with clean water immediately. If the supply air pipe is damaged, replace it immediately after damage.
If the air source car of the long tube respirator cannot follow the user closely, the guardian should be arranged for monitoring to check the air source and inform the user when the air source is about to run out and an alarm is issued and an accident has occurred.